Skip to content
View in the app

A better way to browse. Learn more.

Dry Dock Modeler

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Welcome to Dry Dock Modeler

HMAV Bounty 1787 by AJohnson - Caldercraft - 1:64

Featured Replies

  • Author

Second batch of pictures of the hull fittings:

This gets the build up to where the Bounty was abandoned for another lengthy period where I had discovered Vanguard Models and built a few of their kits instead!

I did try adding a bit more detail for the Lanterns, chains for the Rudder and painting the Amati white metal Crew figures; these are not a patch on the the detailed printed figures you can get now, but as I have them and painted them, they are going to be used.

The final pictures show how the Bounty looked whilst languishing up on the shelf of Shame, while I made:

Nisha Brixham Mubble Bee 1907 - Vanguard Models - 1/64

&

HM Cutter Trial 1790 - Vanguard Models - 1/64

Thanks for looking in and the likes.

Bounty 100.jpg

Bounty 101.jpg

Bounty 102.jpg

Bounty 103.jpg

Bounty 104.jpg

Bounty 105.jpg

Bounty 106.jpg

Bounty 107.jpg

Bounty 108.jpg

Bounty 109.jpg

  • Author

Well after my spell building Nisha & Trial, I picked up the Bounty again and spurred on by the news at that time that Chris at Vanguard was going to do HMS Surprise I thought I better get a wriggle on and finish Bounty before it spends years more under wraps.

One thing though had slowly been eating away at me and that was the general appearance of Bounty with its Blue shiny paint and fancy decorations. Back on MSW 2.0 a very talented artist called Michael P Sutton had researched the look of Bounty.

(Hopefully some of you will remember him and his fine Ship profiles coloured drawings he used to do? Sadly he passed away last year, so access to his wonderful drawing went when MSW 2.0 was hacked. 😔).

Well using Michael's drawing I gave Bounty a face lift, little knowing at the time it would turn out to be my little tribute to the work Michael Sutton had done.

So a few pictures now of the new paint job. - Thank you and remembrance to Michael P Sutton.

Next up the masts.

Bounty 110.JPG

Bounty 111.JPG

Bounty 112.JPG

Bounty 113.JPG

Bounty 114.JPG

Bounty 115.JPG

Bounty 116.JPG

Bounty 117.JPG

Bounty 118.JPG

Bounty 119.JPG

  • Author
51 minutes ago, Ronald-V said:

What a nice model! I always like this one and the Endeavour from Caldercraft...really nice!

51 minutes ago, Ronald-V said:

What a nice model! I always like this one and the Endeavour from Caldercraft...really nice!

Thank you Ronald. I have the Caldercraft Endeavour in my stash!

"The Bounty is a very meaningful ship to me. It was the second ship model I ever chose; back then, driven by a simple desire for a large model, I picked the Artesania kit. Without the necessary skills at the time, I couldn’t finish it, but I still keep it as an unfinished project. I keep it as a reminder to learn from the experience and become a better modeler in the future.
While I am more focused on warships at the moment, I fully intend to buy a new Bounty kit one day and build it to be truly beautiful. I hope to make it look as stunning as your work. I have seen many Bounty models, but seeing yours painted in that lovely yellow ochre—which I personally adore—makes me like it even more. I’ll be cheering you on!"

  • Author

Thank you all for your kind words, I can’t take credit for the colour scheme. I really wish Michael Sutton was still around to explain his thoughts on how Bounty appeared. But the logic was essentially the voyage of the Bounty was essentially a commercial venture to transport plants to provide food for the Slave trade, commanded by a Lieutenant. The only reason we know of the voyage at all is because of the eventual Mutiny, settlement at Pitcairn and amazing survival of Bligh and the others in the ship’s launch.

So we can infer no fancy embellishments or expensive paint would have been approved by the Admiralty. Blue paint especially would have been a highly unlikely choice for the ship and Bligh was not wealthy enough to be paying for such work out of his own pocket at that stage in his life. Also the near contemporary 1790 aquatint by Robert Dodd shows a dark, dull vessel. With this being printed and the copies hand coloured then we can’t take them as gospel, but they do not hint at a highly decorated ship.

The only reference to painting the ship I know of is Bligh ordering the figurehead to be painted in bright colours, but does not go on to say what colours. All intriguing stuff.

IMG_6596.jpeg

  • Author

A Little update from the archive, the build of the Bowsprit. Nothing particular of note about this, other than to note I used the dimensions from the Anatomy of the Ship book by john McKay, this lead to some minor dimensional changes, but more on that with the main masts and spars.

Again thanks for looking in and the Likes and comments.

Bounty 120.jpg

Bounty 121.jpg

Bounty 122.jpg

Bounty 123.jpg

Bounty 124.JPG

  • Author

Next mast building update. for reason that escape me now, I started with the mizzen mast? 😕

Again this was modified dimensionally and in detail as much as I could to follow McKay's book.

The kit mast caps particularly were greatly oversized, the whole process of following taken off dimensions from the book led to a cascade of follow-on consequences with each mast, but I think it was worth the effort, as the mocked up kit dowels and caps looked very clunky to me. The one item I did keep from the kit were the platforms, they seemed alright dimensionally, and a little beyond my skill set to scratch! I did replace the handrail stanchions with wire that as well as being more in scale were actually stronger.

Bounty 125.jpg

Bounty 126.jpg

Bounty 127.jpg

Bounty 128.jpg

Bounty 129.jpg

Bounty 130.jpg

Bounty 131.jpg

Bounty 132.jpg

Bounty 133.jpg

Bounty 134.JPG

Bounty 135.jpg

That mizzen looks good Andrew. You'll be rigging her before you knpow it.

cheers

Pat

If at first you fail, try again, and then again ...

  • Author

Mast:

The main and fore masts were essentially the same so in this log recreation I'll post together for each stage.

As mentioned for the Mizzen mast, I stuck with the kit parts for the platforms, but added a few little embellishments where I could based on McKay's work. These included, chocks, cleats, bolsters, jeer block strop cleats, fids and iron hoops and supports made out of black card.

The mast dimensions were re-sized according to McKay, most visually obvious the mast caps and general thick ness of the masts as mentioned previously.

More mast details to follow, thanks for the comments and likes.

Bounty 136.JPEG

Bounty 137.jpg

Bounty 138.jpg

Bounty 139.jpg

Bounty 140.jpg

Bounty 141.jpg

Bounty 142.jpg

Bounty 143.JPG

  • Author

One detail I did want to add was the timber hoops above and below the rope Wooldings. I've seen a few ways of doing these, but had a go at recreating them with styrene strip, then painting them. I wound the styrene strip around a dowel and then warmed the coil and left it to cool, this then held a coil shape, so i could cut lengths off for each hoop as needed. A few shots attached showing the various stages of that and the overall effect with paint applied and the rope Wooldings added.

Bounty 144.jpg

Bounty 145.JPG

Bounty 146.JPG

Bounty 147.JPG

Bounty 148.JPG

Bounty 149.JPG

Bounty 150.JPG

Bounty 151.JPG

  • Author

Final update for the masts today.

Just a couple of pictures of the steps, nothing more to add to the description of the process. Some "trial" fitting done at each stage to check the height of the tops matched the plans on McKay's Anatomy of the Ship plans and drawings.

The masts have been taken down again to the lowers only, so I can start the shrouds and stays.

I still have the mast cap saddles to make and fit once the topmasts have been fitted.

Thanks for looking in again. - Yards next.

Bounty 152.JPG

Bounty 153.JPG

Bounty 156.JPG

Bounty 157.JPG

Bounty 158.JPG

Bounty 159.JPG

Bounty 160.JPG

Sneaking a peek at what’s on the shelf as well.

  • Author

Yards -

Dimensionally; as you might be able to see from the pencil scribbles on the background plans, the yards were checked and compared to McKay and adjusted accordingly. The lengths of the yards generally were the same as the kit, it was just the diameters that needed tweaking - usually thinner - much thinner in some cases.

I did use a mixture of kit supplied white metal and P.E. fittings for the Boom Irons etc. - a bit overscale, but one of the compromises I was happy to live with.

Not much more to add, just a lot of sanding, shaping and measuring with callipers.

Next update the finished yards with attached block, footropes and a lick of paint where needed.

Bounty 161.jpg

Bounty 162.jpg

Bounty 163.jpg

Bounty 164.jpg

Bounty 165.jpg

Bounty 166.jpg

Bounty 167.jpg

Bounty 168.jpg

  • Author

Final selection of pictures of the yards.

I've got these all finished and rigged, block stropped on and foot ropes etc attached. I've taken the precaution of attaching labels to each one so I don't forget which is which later on! 😆

Well suppose this is it, nothing for it but to start the rigging.... 😬

Thanks for looking in.

Bounty 169.JPG

Bounty 170.JPG

Bounty 171.JPG

Bounty 172.JPG

Bounty 173.JPG

Bounty 174.JPG

Bounty 175.JPG

Bounty 176.JPG

51 minutes ago, AJohnson said:

Well suppose this is it, nothing for it but to start the rigging.... 😬

Not much left but to get after it….

Wait….. what is that other kit on the shelf?? 🤔😆

Quando Omni Flunkus, Moritati

  • Author
1 hour ago, AndyP said:

Not much left but to get after it….

Wait….. what is that other kit on the shelf?? 🤔😆

You got me! - That is sooo tempting.... 😆

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.